Translate Toolkit & Pootle

Tools to help you make your software local

User Tools


This is a temporary page created for a table for Virtaal's quality checks table.

Descriptions of all pofilter tests

The following are descriptions of the tests available in pofilter, Pootle and Virtaal (since version 0.7) with some details about what type of errors they are useful to test for and the limitations of each test.

Keep in mind that the software might point to errors which are not necessarily wrong (false positives).

Currently there are 47 tests. You can always get a list of the currently available tests by running:

pofilter -l

To see test specific to a specific targetted application or group of applications run:

pofilter --gnome -l

Quality checks in Virtaal

Adding new tests and new language adaptations

If you have an idea for a new test or want to add target language adaptations for your language then please help us with information about your test idea and the specifics of your language.

Test Classification

Some tests are more important than others so we have classified them to help you determine which to run first.

Test Description

accelerators

Checks whether accelerators are consistent between the two strings.

Make sure you use the --mozilla, --kde, etc options so that pofilter knows which type of accelerator it is looking for. The test will pick up accelerators that are missing and ones that shouldn't be there.

acronyms

checks that acronyms that appear are unchanged

If the acronym URL appears in the original this test will check that it appears in the translation. Translating acronyms is a language decision but many languages leave them unchanged in that case this test is useful for tracking down translations of the acronym and correcting them.

blank

checks whether a translation is totally blank

This will check to see if a translation has inadvertently been translated as blank ie as spaces. This is different from untranslated which is completely empty. This test is useful in that if something is translated as ” ” it will appear to most tools as if it is translated.

brackets

checks that the number of brackets in both strings match

If ([{ or }]) appear in the original this will check that the same number appear in the translation.

compendiumconflicts

checks for Gettext compendium conflicts (#-#-#-#-#)

When you use msgcat to create a PO compendium it will insert #-#-#-#-# into entries that are not consistent. If the compendium is used later in a message merge then these conflicts will appear in your translations. This test quickly extracts those for correction.

credits

checks for messages containing translation credits instead of normal translations.

Some projects have consistent ways of giving credit to translators by having a unit or two where translators can fill in their name and possibly their contact details. This test allows you to find these units easily to check that they are completed correctly and also disables other tests that might incorrectly get triggered for these units (such as urls, emails, etc.)

doublequoting

checks whether doublequoting is consistent between the two strings

Checks on double quotes ” to ensure that you have the same number in both the original and the translated string. This tests takes into account that several languages use different quoting characters, and will test for them instead.

doublespacing

checks for bad double-spaces by comparing to original

This will identify if you have [space][space] in when you don't have it in the original or it appears in the original but not in your translation. Some of these are spurious and how you correct them depends on the conventions of your language.

doublewords

checks for repeated words in the translation

Words that have been repeated in a translation will be highlighted with this test e.g. “the the”, “a a”. These are generally typos that need correcting. Some languages may have valid repeated words in their structure, in that case either ignore those instances or switch this test off using the --excludefilters option.

emails

checks to see that emails are not translated

Generally you should not be translating email addresses. This check will look to see that email addresses e.g. info@example.com are not translated. In some cases of course you should translate the address but generally you shouldn't.

endpunc

checks whether punctuation at the end of the strings match

This will ensure that the ending of your translation has the same punctuation as the original. E.g. if it ends in :[space] then so should yours. It is useful for ensuring that you have ellipses […] in all your translations, not simply three separate full-stops. You may pick up some errors in the original: feel free to keep your translation and notify the programmers. In some languages, characters such as ? ! are always preceded by a space e.g. [space]? — do what your language customs dictate. Other false positives you will notice are, for example, if through changes in word-order you add ”), etc. at the end of the sentence. Do not change these: your language word-order takes precedence.

It must be noted that if you are tempted to leave out [full-stop] or [colon] or add [full-stop] to a sentence, that often these have been done for a reason, e.g. a list where fullstops make it look cluttered. So, initially match them with the English, and make changes once the program is being used.

This check is aware of several language conventions for punctuation characters, such as the custom question marks for Greek and Arabic, Devenagari Danda, full-width punctuation for CJK languages, etc. Support for your language can be added easily if it is not there yet.

endwhitespace

checks whether whitespace at the end of the strings matches

Operates the same as endpunc but is only concerned with whitespace. This filter is particularly useful for those strings which will evidently be followed by another string in the program, e.g. [Password: ] or [Enter your username: ]. The whitespace is an inherent part of the string. This filter makes sure you don't miss those important but otherwise invisible spaces!

If your language uses full-width punctuation (like Chinese), the visual spacing in the character might be enough without an added extra space.

escapes

checks whether escaping is consistent between the two strings

Checks escapes such as \n \uNNNN to ensure that if they exist in the original that you have them in the translation.

filepaths

checks that file paths have not been translated

Checks that paths such as /home/user1 have not been translated. Generally you do not translate a file-path, unless it is being used as an example, e.g. [your_user_name/path/to/filename.conf].

functions

checks to see that function names are not translated

Checks that function names eg. rgb() or getEntity.Name() are not translated.

gconf

Checks if we have any gconf config settings translated

Gconf settings should not be translated so this check checks that gconf settings such as “name” or “modification_date” are not translated in the translation. It allows you to change the surrounding quotes but will ensure that the setting values remain untranslated.

hassuggestion

Checks if there is at least one suggested translation for this unit

If a message has a suggestion (an alternate translation stored in alt-trans units in XLIFF and .pending files in PO) then these will be extracted. This is used by Pootle and is probably only useful in pofilter when using XLIFF files.

isfuzzy

check if the po element has been marked fuzzy

If a message is marked fuzzy in the PO file then it is extracted. Note this is different from --fuzzy and --nofuzzy options which specify whether tests should be performed against messages marked fuzzy

isreview

check if the po element has been marked review

If you have made use of the 'review' flags in your translations:

# (review) reason for review
# (pofilter) testname: explanation for translator

Then if a message is marked for review in the PO file it will be extracted. Note this is different from --review and --noreview options which specify whether tests should be performed against messages already marked as under review.

kdecomments

checks to ensure that no KDE style comments appear in the translation

KDE style translator comments appear in PO files as “_: comment\n”. New translators often translate the comment. This test tries to identify instances where the comment has been translated.

long

checks whether a translation is much longer than the original string

This is most useful in the special case where the translation is multiple characters long while the source text is only 1 character long. Otherwise, we use a general ratio that will catch very big differences but is set conservatively to limit the number of false positives.

musttranslatewords

checks that words configured as definitely translatable don't appear in the translation

If for instance in your language you decide that you must translate 'OK' then this test will flag any occurances of 'OK' in the translation if it appeared in the source string. You must specify a file containing all of the must translate words using --musttranslatefile.

newlines

checks whether newlines are consistent between the two strings

Counts the number of \n newlines (and variants such as \r\n) and reports and error if they differ.

nplurals

checks for the correct number of noun forms for plural translations.

This uses the plural information in the language module of the toolkit. This is the same as the Gettext nplural value. It will check that the number of plurals required is the same as the number supplied in your translation.

notranslatewords

checks that words configured as untranslatable appear in the translation too

Many brand names should not be translated, this test allows you to easily make sure that words like: Word, Excel, Impress, Calc, etc. are not translated. You must specify a file containing all of the no translate words using --notranslatefile.

numbers

checks whether numbers of various forms are consistent between the two strings

You will see some errors where you have either written the number in full or converted it to the digit in your translation. Also changes in order will trigger this error.

options

checks that command line options are not translated

In messages that contain command line options, such as '--help', this test will check that these remain untranslated. These could be translated in the future if programs can create a mechanism to allow this, but currently they are not translated. If the options has a parameter, e.g. '--file=FILE', then the test will check that the parameter has been translated.

printf

checks whether printf format strings match

If the printf formatting variables are not identical, then this will indicate an error. Prinf statements are used by programs to format output in a human readable form (they are place holders for variable data). They allow you to specify lengths of string variables, string padding, number padding, precision, etc. (See Printf for more details). Generally they will look like this: %d, %5.2f, %100s, etc. The test can also manage variables-reordering using the %1$s syntax. The variables' type and details following data are tested to ensure that they are strictly identical, but they may be reordered.

puncspacing

checks for bad spacing after punctuation

In the case of [full-stop][space] in the original, this test checks that your translation does not remove the space. It checks also for [comma], [colon], etc.

Some languages don't use spaces after common punctuation marks, especially where full-width punctuation marks are used. This check will take that into account.

purepunc

checks that strings that are purely punctuation are not changed

This extracts strings like ”+” or ”-” as these usually should not be changed.

sentencecount

checks that the number of sentences in both strings match

Adds the number of sentences to see that the sentence count is the same between the original and translated string. You may not always want to use this test, if you find you often need to reformat your translation, because the original is badly-expressed, or because the structure of your language works better that way. Do what works best for your language: it's the meaning of the original you want to convey, not the exact way it was written in the English.

short

checks whether a translation is much shorter than the original string

This is most useful in the special case where the translation is 1 characters long while the source text is multiple characters long. Otherwise, we use a general ratio that will catch very big differences but is set conservatively to limit the number of false positives.

simplecaps

checks the capitalisation of two strings isn't wildly different

This will pick up many false positives, so don't be a slave to it. It is useful for identifying translations that don't start with a capital letter (upper-case letter) when they should, or those that do when they shouldn't. It will also highlight sentences that have extra capitals; depending on the capitalisation convention of your language, you might want to change these to Title Case, or change them all to normal sentence case.

simpleplurals

checks for English style plural(s) for you to review

This test will extract any message that contains words with a final ”(s)” in the source text. You can then inspect the message, to check that the correct plural form has been used for your language. In some languages, plurals are made by adding text at the beginning of words, making the English style messy. In this case, they often revert to the plural form. This test allows an editor to check that the plurals used are correct. Be aware that this test may create a number of false positives.

For languages with no plural forms (only one noun form) this test will simply test that nothing like ”(s)” was used in the translation.

singlequoting

checks whether singlequoting is consistent between the two strings

The same as doublequoting but checks for the ' character. Because this is used in contractions like it's and in possessive forms like user's, this test can output spurious errors if your language doesn't use such forms. If a quote appears at the end of a sentence in the translation, i.e. '[full-stop], this might not be detected properly by the check.

spellcheck

checks for words that don't pass a spell-check

This test will check for misspelled words in your translation. The test first checks for misspelled words in the original (usually English) text, and adds those to an exclusion list. The advantage of this exclusion is that many words that are specific to the application will not raise errors e.g. program names, brand names, function names.

The checker works with PyEnchant. You need to have PyEnchant installed as well as a dictionary for your language (for example, one of the Hunspell or aspell dictionaries). This test will only work if you have specified the --language option.

The pofilter error that is created, lists the misspelled word, plus suggestions returned from the spell checker. That makes it easy for you to identify the word and select a replacement.

startcaps

checks that the message starts with the correct capitalisation

After stripping whitespace and common punctuation characters, it then checks to see that the first remaining character is correctly capitalised. So, if the sentence starts with an upper-case letter, and the translation does not, an error is produced.

This check is entirely disabled for many languages that don't make a distinction between upper and lower case. Contact us if this is not yet disabled for your language.

startpunc

checks whether punctuation at the beginning of the strings match

Operates as endpunc but you will probably see fewer errors.

startwhitespace

checks whether whitespace at the beginning of the strings matches

As in endwhitespace but you will see fewer errors.

tabs

checks whether tabs are consistent between the two strings

Counts the number of \t tab markers and reports an error if they differ.

unchanged

checks whether a translation is basically identical to the original string

This checks to see if the translation isn't just a copy of the English original. Sometimes, this is what you want, but other times you will detect words that should have been translated.

untranslated

checks whether a string has been translated at all

This check is really only useful if you want to extract untranslated strings so that they can be translated independently of the main work.

urls

checks to see that URLs are not translated

This checks only basic URLs (http, ftp, mailto etc.) not all URIs (e.g. afp, smb, file). Generally, you don't want to translate URLs, unless they are example URLs (http://your_server.com/filename.html). If the URL is for configuration information, then you need to query the developers about placing configuration information in PO files. It shouldn't really be there, unless it is very clearly marked: such information should go into a configuration file.

validchars

checks that only characters specified as valid appear in the translation

Often during character conversion to and from UTF-8 you get some strange characters appearing in your translation. This test presents a simple way to try and identify such errors.

This test will only run of you specify the --validcharsfile command line option. This file contains all the characters that are valid in your language. You must use UTF-8 encoding for the characters in the file.

If the test finds any characters not in your valid characters file then the test will print the character together with its Unicode value (e.g. 002B).

variables

checks whether variables of various forms are consistent between the two strings

This checks to make sure that variables that appear in the original also appear in the translation. Make sure you use the --kde, --openoffice, etc flags as these define what variables will be searched for. It does not at the moment cope with variables that use the reordering syntax of Gettext PO files.

xmltags

checks that XML/HTML tags have not been translated

This check finds the number of tags in the source string and checks that the same number are in the translation. If the counts don't match then either the tag is missing or it was mistakenly translated by the translator, both of which are errors.

The check ignores tags or things that look like tags that cover the whole string e.g. ”<Error>” but will produce false positives for things like “An <Error> occurred” as here “Error” should be translated. It also will allow translation of the alt attribute in e.g. <img src=bob.png alt=“Image description”> or similar translatable attributes in OpenOffice.org help files.